Catch-pit Ancillaries
Rubber Stone Guards
Patent No. - 2542850
Factory fitted to suit TDK and TDE pipes, Rubber Stone Guards reduce the ability for the granular fill material to ingress the GRP preformed sump unit during installation. This reduces the time taken on site to install a catch-pit as no additional works are required to ‘dig out’ any fill material that has accumulated in the catch-pit sump.
| Product | Pipe Size | PADs Code |
| 225 RSG | <225 mm ID TDK Pipe
<250 mm OD TDE Pipe |
0057 / 101366 |
| 300 RSG | <300 mm ID TDK Pipe
<355 mm OD TDE Pipe |
0057 / 101367 |
| 450 RSG | <450 mm ID TDK Pipe
<450 mm OD TDE Pipe |
0057 / 101368 |
Rodding Ledges
For use with Watford and Extra-Deep Watford sump units and installed in pairs.
Rodding Ledges sit neatly in a recess either side and at the top of the preformed sump unit to provide a platform for operatives to stand on during installation or maintenance.
Can be used in conjunction with PCC or Derby GRP catch-pit frames.
- Must be installed in Watford or Extra-Deep Watford GRP Sump Units
- Provides a platform within the catch-pit, raised from the sump invert to perform maintenance tasks.
- 1270 mm Long x 190 mm Wide x 65 mm Deep
- GRP – 7Kg
- PCC - 38Kg
| Rodding Ledge Type | PADs Code |
| Pre-Cast Concrete (PCC) | 0004 / 013510 |
| Derby GRP | 0057 / 100656 |
Product Technical Data
Restricted Content: Please Login to Access Product Technical Data